VCut Family
The VCUT cutter’s family is the latest OROX® solution designed and developed to increase the quality and to speed up any kind of production.
The innovative technologies and quality materials build in the VCUT system, grant a high quality and high performance in the cutting production, reducing manpower costs, waste of raw materials, and eliminate the human mistakes in the cutting room.
The several patents in our cutting solutions, combined with cutting-edge hardware- software tools, allow our customers to get competitive advantages and benefits in their production.
High quality and high performance
in the cutting production
These are only few of the new features
introduced on VCut family cutters:
EtherCAT
Communication Bus
New Vacuum
Suction System
Absolute Encoders
System
«TMOV»
smart
EtherCAT Communication BUS – thanks to the use of this new technology which allows data to be updated quickly with low communication jitter, the performance of the Vcut cutters has improved by up to 30% compared to the previous model.
New Vacuum Suction System – The suction system has been completely renewed; the introduction of a new high -performance turbine, the introduction of a new system of air collectors, the introduction of an increasingly accurate system management software, allow the VCUT to reach very high performance in terms of power and uniformity of the aspiration reducing at the same time the electrical consumption.
Absolute Encoders System – to control axes position in every moment and, for the first time, this makes possible to work without the initialization procedure.
«TMOV» smart – allows the VCUT to automatically move from one spreading line to another with the simple push of a button, automatically stopping in the correct position.
VCUT Plus is the solution designed and developed to ensure high performance and maximum reliability in the cutting room; thanks to the rich set of accessories included and its technical characteristics, it represents the ideal solution both for small productions and for mass production.
VCUT Plus can also be enriched with more accessories in order to match any customer’s production needs.
VCUT Plus is suitable to process from single layer up to 3, 6 or 8 or 10 cm of compressed fabric and it’s available on two different dimensions of cutting window: 185×200 cm or 200x200cm
Effective cutting height
from single layer up to 3, 6 or 8 or 10 cm compressed
Effective cutting width
185, 200, 225 cm
Effective cutting length
190, 200 cm
Discharge conveyor length
200 cm
Max. Power supply
22 Kw single turbine
Average power consumption
8,5 Kw single turbine
Electric requirements
Tri phase + neutral 400V 50Hz+/- 10%
Axis speed
120 mt/min
Acceleration
1,2 G
Noisiness
< 75 dB A
Operator side
Left or Right
Effective cutting height
from single layer up to 3, 6 or 8 or 10 cm compressed
Effective cutting width
185, 200, 225 cm
Effective cutting length
190, 200 cm
Discharge conveyor length
200 cm
Max. Power supply
22 Kw single turbine
Average power consumption
8,5 Kw single turbine
Electric requirements
Tri phase + neutral 400V 50Hz+/- 10%
Axis speed
120 mt/min
Acceleration
1,2 G
Noisiness
< 75 dB A
Operator side
Left or Right
Effective cutting height
from single layer up to 3, 6 or 8 or 10 cm compressed
Effective cutting width
185, 200, 225 cm
Effective cutting length
190, 200 cm
Discharge conveyor length
200 cm
Max. Power supply
22 Kw single turbine
Average power consumption
8,5 Kw single turbine
Electric requirements
Tri phase + neutral 400V 50Hz+/- 10%
Axis speed
120 mt/min
Acceleration
1,2 G
Noisiness
< 75 dB A
Operator side
Left or Right
VCUT Max is the perfect solution for the customer that are looking for the perfect mix between performance and quality for his cutting room; in addition to the accessories already included in the Plus configuration, VCUT Max includes also the Flese System (that guarantee a perfect perpendicular cutting with a perfect correspondence of the upper and lower pieces on the mattress), the Balance System of the Knife (knife oscillation speed of 6200 rpm) and the Cover Curtain (to reduce the energy consuption avoiding waste of suction power on cutted pieces)
Thanks to the rich set of accessories included and its technical characteristics, it represents the ideal solution both for medium and mass production.
VCUT Max can also be enriched with more accessories in order to match any customer’s production needs.
VCUT Max is suitable to process from single layer up to 6 or 8 or 10 cm of compressed fabric and it’s available on five different dimensions of cutting window.
Effective cutting height
from single layer up to 6 or 8 or 10 cm compressed
Effective cutting width
185, 200, 225, 240 cm
Effective cutting length
170, 190, 200 cm
Discharge conveyor length
200 cm
Max. Power supply
22 Kw single turbine
Average power consumption
8,5 Kw single turbine
Electric requirements
Tri phase + neutral 400V 50Hz+/- 10%
Axis speed
120 mt/min
Acceleration
1,2 G
Noisiness
< 75 dB A
Operator side
Left or Right
Effective cutting height
from single layer up to 6 or 8 or 10 cm compressed
Effective cutting width
185, 200, 225, 240 cm
Effective cutting length
170, 190, 200 cm
Discharge conveyor length
200 cm
Max. Power supply
22 Kw single turbine
Average power consumption
8,5 Kw single turbine
Electric requirements
Tri phase + neutral 400V 50Hz+/- 10%
Axis speed
120 mt/min
Acceleration
1,2 G
Noisiness
< 75 dB A
Operator side
Left or Right
Effective cutting height
from single layer up to 6 or 8 or 10 cm compressed
Effective cutting width
185, 200, 225, 240 cm
Effective cutting length
170, 190, 200 cm
Discharge conveyor length
200 cm
Max. Power supply
22 Kw single turbine
Average power consumption
8,5 Kw single turbine
Electric requirements
Tri phase + neutral 400V 50Hz+/- 10%
Axis speed
120 mt/min
Acceleration
1,2 G
Noisiness
< 75 dB A
Operator side
Left or Right
VCUT Extreme is solution created for the customer that are looking for a performance without compromise; in addition to the accessories already included in the Max configuration, VCUT Extreme is equipped with a Double Turbine Suction System with 40 KW of max power and with Control of Conveyor carpet on both side of the machine
Thanks to the rich set of accessories included and its technical characteristics, it represents the ideal solution both for medium and mass production.
VCUT Extreme can also be enriched with more accessories in order to match any customer’s production needs.
VCUT Extreme is suitable to process from single layer up to 6 or 8 or 10 cm of compressed fabric and it’s available on four different dimensions of cutting window.
Effective cutting height
from single layer up to 6, 8 or 10 cm compressed
Effective cutting width
185, 200, 225, 240 cm
Effective cutting length
190, 200 cm
Discharge conveyor length
200 cm
Max. Power supply
40 Kw double turbine
Average power consumption
9,5 Kw single turbine
Electric requirements
Tri phase + neutral 400V 50Hz+/- 10%
Axis speed
120 mt/min
Acceleration
1,2 G
Noisiness
< 75 dB A
Operator side
Left or Right
Effective cutting height
from single layer up to 6, 8 or 10 cm compressed
Effective cutting width
185, 200, 225, 240 cm
Effective cutting length
190, 200 cm
Discharge conveyor length
200 cm
Max. Power supply
40 Kw double turbine
Average power consumption
9,5 Kw single turbine
Electric requirements
Tri phase + neutral 400V 50Hz+/- 10%
Axis speed
120 mt/min
Acceleration
1,2 G
Noisiness
< 75 dB A
Operator side
Left or Right
Effective cutting height
from single layer up to 6, 8 or 10 cm compressed
Effective cutting width
185, 200, 225, 240 cm
Effective cutting length
190, 200 cm
Discharge conveyor length
200 cm
Max. Power supply
40 Kw double turbine
Average power consumption
9,5 Kw single turbine
Electric requirements
Tri phase + neutral 400V 50Hz+/- 10%
Axis speed
120 mt/min
Acceleration
1,2 G
Noisiness
< 75 dB A
Operator side
Left or Right
Software V-Cut
The software V-CUT with its algorithms, ensures top performances in the cutting production, combining features such as «continuous cutting» system, «zero gap» between the pieces, cut files optimization and advanced management of cutting strategies in the single pieces or in the whole marker.
VCUT technology can be integrated and interfaced with the other tools in the cutting room, in order to create a single data management platform and achieve the goals to speed up and remove the mistakes in the production process.
For any information fill the form
